ATV / UTV / SXS. Direct replacement to your original unit. Plug-and-play, direct fit, easy installation.
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced. Highest grade copper windings, resistant to 200 degrees Celsius.All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part. 3005-251 3004-836 3005-012 3004-128 3004-385 3004-452.
Dimensions : Interior diameter : 34 mm Exterior diameter : 93 mm Thickness : 15 mm Length of wires stator to plug : 275 mm. Other specifications : Number of wires : 8 Number of plugs : 3 Number of pins : 9 Wire to wire resistance : Alternator : Yellow to Yellow = 0.1 ohms +/-20% Source 1 : Green to Black = 25 ohms +/-20% Source 2 : Green to White = 447 ohms +/-20%. Before installing your new stator.Check the AC output of the stator. Replace any burned or corroded connectors on stator and regulator/rectifier. Check and repair any melted wiring. Use hi-temp dielectric grease on all connectors. Our stator may use a different wire color code than your original. All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. More than 20 years of assisting mechanics around the world resolving the worst electrical problems made us know our stuff. When it comes to vehicle electrics, we definitively are the power in powersports. This item is in the category "Automotive\Parts & Accessories\Snowmobile Parts\Electrical Components".The seller is "rmstator-canada" and is located in this country: CA. This item can be shipped worldwide.