ATV / UTV / SXS. Brand new after market stator. Highest grade copper windings resistant to 200 degrees celsius. Battery condition is extremely important.No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Brand new aftermarket generator stator. Direct replacement to your original unit. Plug-and-play, direct fit, easy installation.
Highest grade copper windings, resistant to 200 degrees Celsius. We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues. All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part. Dimensions : Interior diameter : 54 mm Exterior diameter : 115 mm Thickness : 15mm Length of wires stator to grommet : 130 mm Length of wires grommet to plug : 935 mm.
Other specifications : Number of wires : 3 Number of plugs: 1 Number of pins : 3 Wire to wire resistance : Alternator : Yellow between each Yellow = 0.4 ohms +/-20%. Before installing your new stator. Check the AC output of the stator. Replace any burned or corroded connectors on stator and regulator/rectifier. Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors. Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such.When bolting stator in, always use locking compound. More than 20 years of assisting mechanics around the world resolving the worst electrical problems made us know our stuff. When it comes to vehicle electrics, we definitively are the power in powersports.