ATV Studs must be 10x1.25 Threads. 2009 Prowler 550 (4WD / 4x4 Only). RockTrix Offroad ATV Wheel Spacers - Fits machines with 4/115 Bolt Pattern, a hub lip (center bore) not larger than 85mm, and M10x1.25 10x1.25mm wheel studs. Works with various ATV, UTV, Side by Side, Quads. Your wheel studs MUST be 10x1.25 for these to fit.
Compatible with Arctic Cat 250, 300, 400, 500 4WD, 650 4WD, 700 4WD, 1000 4WD, Prowler 650 4WD, Prowler XT 550 4WD, Prowler XT 650 4WD, Prowler XT 700 4WD, Wildcat 1000 4WD. Also compatible with the REAR of Yamaha Banshee 350, Raptor 125, Rapter 350, Raptor 660R, Raptor 700, Raptor 700R, Warrior 350.
Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs. [PRODUCT BENEFITS] Gives your machine's body a more aggressive stance and ensures exceptional wheel balance. Fixes brake caliper clearance issues.Increases wheel / tire clearance to allow installation of larger or wider wheels/tires. [INSTALLATION] Requires standard tire repair tools, a torque wrench, and lug socket. While installation is simple and most knowledgeable buyers can install themselves, we always recommend professional installation especially if it is your first time installing auto accessories.
Check and re-torque all hardware, including lug nuts securing adapter to wheel hub after 25-50 miles. Four (4) Spacers (16 Lug Nuts Included). Message us with the year/make/model of your ATV and we'll be glad to find a compatible spacer. We've provided the following information as a general reference for purchasing and installing these spacers/adapters.
The following list isn't all-inclusive and may be different depending on the vehicle you drive, type of wheels you have, and ideal setup you're trying to achieve. Failure to install properly may cause your lug nuts/wheel studs/spacers to loosen or break while driving.
If you are not confident or familiar with the installation, please ask a trained professional for help. Before Purchasing - Measure your wheel gap for clearance.You will need at least 2.0 (50mm) of clearance to prevent the wheel/tire from hitting the fender or fenderliner. The vehicles wheel studs need to be measured. If the studs are longer than 2.0 (50mm), it will extend past the spacer's surface. It may not be possible to bolt the wheel safely onto the spacer, depending on whether your wheels have pockets/cavities around the mounting pad.
Before Installation Check compatibility of spacer-to-hub, spacer-to-wheel, and lug nuts (thread pitch & seat type) During Installation - Installation should be performed by a trained professional using proper tools. Avoid using an impact wrench or any pneumatic tools; improper usage may cause damage to components.Typically, its a minimum of 5-8 turns before the lug nut tightens, however, it varies depending on thread pitch and type of vehicle. ALL Lug nuts MUST be torqued to manufacture specifications. After Installation - Test drive your vehicle to ensure the hardware is installed properly.
Pay close attention for any noises, vibrations, or compatibility issues (such as fender rubbing). NOTE: This is an aftermarket/replacement component.The vehicle makes and models used in this listing are registered trademarks of their respective owners, and are used in this listing only to identify the vehicles to which this part fits. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item "4pc 2 Thick ATV 4/115 Wheel Spacers for many Arctic Cat 4x115 10x1.25 Studs Nut" is in sale since Monday, August 11, 2014. This item is in the category "eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Wheels, Tires". The seller is "pe-motorwerks" and is located in Santa Ana, California. This item can be shipped worldwide.